Fiberglass
Set in weeks and easy to keep clean. Prices, sizes and who installs them near Tyler.
Learn more →
Get a price before anyone visits
Inground Pool Builders in Tyler, TX
Choose a pool type, a size and the add-ons you want, and see a sourced price range right away. If you'd like, one local builder then looks at your yard and gives you a written quote. Free for you.
- Ranges sourced and dated
- Written for Smith County soil and rules
- One builder calls, not a crowd
A backyard pool dig under way.
The 60-second cost estimator
Estimate your Tyler pool
Make a few selections for a ballpark installed cost. No contact information needed.
Simple by design
Here's how it works.
From a rough number to a real quote, without filling your phone with sales calls.
STEP 01
Price it
Pick fiberglass, vinyl or gunite, a size and any add-ons. Your range shows up instantly.
STEP 02
Send your request
Tell us your town and anything about the yard: slope, sand, septic, trees. About a minute.
STEP 03
One local builder calls
One local builder reviews it, visits your lot and puts a price in writing.
One request. One local company. We never sell your details to a list.
Straightforward pricing
What does a pool cost in Tyler?
Tyler builders quote in person, not online. These are our ranges for the pool itself, set from current Texas and national cost guides.
| Pool type | Our estimate, small to large | Worth knowing |
|---|---|---|
| Vinyl liner | $35,000–88,000 | Lowest to build; the liner wears out over time |
| Fiberglass | $45,000–105,000 | Quickest install; no re-plastering |
| Gunite / concrete | $52,000–130,000 | Any shape; what most Tyler builders do |
| Deck, fence and permit | +$8,000–24,000 | Nearly every yard needs all three |
Our estimates from This Old House, River Pools and Fixr (2025–2026), November 2026. Spa, heat pump and site work are extra.
Find your fit
Choose the pool that suits your lot.
Red clay, sandy ridges, long hot summers and rural septic systems all shape the choice in Smith County.
Gunite
Custom shapes, spas and ledges. The build steps and what concrete costs here.
Learn more →Red clay & soil
Clay, sand, ironstone and winter water: what each means when the digging starts.
Learn more →Permits & fences
Tyler's permit, the 4 ft barrier and 5 ft setback, and rules outside the city.
Learn more →Written for East Texas
Red dirt, pine trees and 95-degree Augusts.
Much of Smith County is sandy topsoil over red clay laced with ironstone, and some ridges are deep sand. That changes how a pool is dug, backfilled and drained. Add rural septic fields and a long, hot swim season, and local know-how matters. Read about Tyler soil.
Your next step
Get one firm quote.
Ready for an actual price? Tell us what you're considering. We'll send your request to one local, insured builder, not a marketplace of salespeople.
No cost to request a quote
Your details go to one builder
No obligation to hire
Tyler Pool Builders is a referral service, not the company doing the work. We may be paid by the builder if we refer your project. You pay us nothing.
Request received. Thank you!
One local builder will reach out within 1 business day.
Keep an eye on your preferred contact method.
Before you build
Permits, fences & who to check
Permits: inside Tyler, a city permit through eTRAKiT; Whitehouse, Lindale, Bullard and the other towns run their own.
Fences: pools over 18 in deep must be enclosed in Tyler, at least 4 ft high in single-family zones, and 5 ft from the house.
Contractors: Texas has no pool-builder license, so check insurance, reviews and the electrician's state license.
Read the full guide →Good questions
Frequently asked questions.
How much does an inground pool cost in Tyler, TX?
Our estimate for the pool alone: about $35,000–54,000 for a small vinyl liner pool, $45,000–105,000 for fiberglass, and $52,000–130,000 for gunite, depending on size. Most yards also need a deck, a fence and a permit, which add roughly $8,000–24,000. River Pools puts a turnkey Texas fiberglass job at $45,000–85,000 and up (River Pools, 2025).
What is the least expensive kind of pool to put in?
Vinyl liner costs least on day one. It loses some of that edge over the years, since liners wear out and get replaced. Fiberglass costs more to start and the least to own, because there is no plaster to redo (This Old House).
Is fiberglass or gunite better for East Texas?
Both work here. Most Tyler builders are gunite shops, so concrete is the local default and fits any shape. Fiberglass goes in faster, has a smooth surface that needs fewer chemicals, and never needs re-plastering, but you choose from factory shapes no wider than a truck can haul, about 16 ft.
Is red clay a problem for a pool?
It mostly means harder digging. Common Tyler soils such as Kirvin and Cuthbert have a sandy topsoil over red clay that starts within about a foot of the surface, often with chunks of ironstone (USDA). Expect more dirt to haul, and ask how the builder will keep water from collecting against the shell.
Will expansive soil crack my pool?
Tyler's red clays usually swell less than the black clays west of here on the Blackland Prairie, which USDA classes as a different, more expansive clay type (USDA). Some lots still move with wet and dry seasons. A soil test, or a look at the Web Soil Survey, tells you what is under your yard.
What if my yard is deep sand?
Parts of the county sit on deep, loose sand (USDA: Darco). Sand drains well, but the sides of the hole can slump while it is open, so crews may cut a wider hole or brace it. One local builder warns that soft sandy soil can collapse a pool's walls if it is not handled (Texas Crystal Blue Pools).
Do I need a permit for a pool in Tyler?
Yes. Tyler's development code says no pool or spa may be built until a permit is issued, and it must sit at least 5 ft from the house (UDC 10-79(j), via cityrulelookup). Applications and inspection requests go through the city's eTRAKiT portal. Your builder normally handles it.
How tall does a pool fence have to be in Tyler?
Inside the city, any pool holding more than 18 in of water has to be enclosed. In single-family zones the fence, wall or building must be at least 4 ft high; other pools need a taller barrier (Tyler Code Sec. 6-14). Gates that shut and latch on their own are the norm. Confirm with the city before you order a fence.